×
If you provide me with more context or details about the Lambert Lx 24 Fi (e.g., what type of product it is, its intended use, etc.), I may be able to help you better.
| Code | Meaning | User Action | |------|---------|--------------| | | Ignition failure (no flame after 3 attempts) | Press Reset. Check gas supply (other appliances working?). If persists, call engineer. | | E02 | Flame loss during operation | Reset boiler. Check flue terminal for wind or blockage. | | E03 | Low system water pressure | Repressurise to 1.5 bar (see section 4.4). | | E05 | Overheating (flow temp > 95°C) | Check radiator valves are open. Bleed air from system. | | E10 | Fan or flue pressure switch fault | Cannot be user-reset. Contact engineer. | | E34 | External sensor fault (if installed) | Call engineer. Boiler will run on default curve until fixed. |
Lacks built-in WiFi, requiring manual control for all settings. Efficiency:
Before performing any task described in this guide, ensure the boiler is isolated from the electrical and gas supplies unless otherwise stated.
The following technical details are critical for understanding the unit's capacity and installation requirements: : 24 kW (Maximum); 9.6 kW (Minimum). Combustion Chamber : Closed (Fi model).
The front interface of the Lambert Lx 24 Fi is designed for simplicity. Most versions feature:
The is a wall-hung, dual-circuit convectional gas boiler designed for both central heating and domestic hot water (DHW). This 24 kW system features a closed combustion chamber and is known for its compact design, making it suitable for smaller living spaces. Essential Operating Guide
If you provide me with more context or details about the Lambert Lx 24 Fi (e.g., what type of product it is, its intended use, etc.), I may be able to help you better.
| Code | Meaning | User Action | |------|---------|--------------| | | Ignition failure (no flame after 3 attempts) | Press Reset. Check gas supply (other appliances working?). If persists, call engineer. | | E02 | Flame loss during operation | Reset boiler. Check flue terminal for wind or blockage. | | E03 | Low system water pressure | Repressurise to 1.5 bar (see section 4.4). | | E05 | Overheating (flow temp > 95°C) | Check radiator valves are open. Bleed air from system. | | E10 | Fan or flue pressure switch fault | Cannot be user-reset. Contact engineer. | | E34 | External sensor fault (if installed) | Call engineer. Boiler will run on default curve until fixed. |
Lacks built-in WiFi, requiring manual control for all settings. Efficiency:
Before performing any task described in this guide, ensure the boiler is isolated from the electrical and gas supplies unless otherwise stated.
The following technical details are critical for understanding the unit's capacity and installation requirements: : 24 kW (Maximum); 9.6 kW (Minimum). Combustion Chamber : Closed (Fi model).
The front interface of the Lambert Lx 24 Fi is designed for simplicity. Most versions feature:
The is a wall-hung, dual-circuit convectional gas boiler designed for both central heating and domestic hot water (DHW). This 24 kW system features a closed combustion chamber and is known for its compact design, making it suitable for smaller living spaces. Essential Operating Guide
