4n15 Engine Service Manual New !!exclusive!! Access

Delivers approximately 181 hp (133 kW) at 3,500 RPM and 430 Nm of torque at 2,500 RPM.

| Component | Interval (km / months) | Manual Note | | :--- | :--- | :--- | | Engine oil & filter | 15,000 km / 12 mo | Use API CK-4 or C3 5W-30. Do not use C4. | | Fuel filter | 30,000 km | Drain water every 5,000 km. | | Air cleaner element | 30,000 km (inspect every 15k) | Replace earlier in dust. | | Timing chain & tensioner | Inspect at 150,000 km | No replacement interval, but inspect guides. | | Valve clearance | Inspect at 90,000 km | Intake: 0.15–0.25mm cold, Exhaust: 0.25–0.35mm cold | | Drive belt (alternator/AC) | Inspect every 15,000 km | Replace at 90,000 km. | | Coolant | 90,000 km / 48 mo | Use Mitsubishi Super Long Life Coolant (pink). | 4n15 engine service manual new

Before diving into the manual, you must understand the beast you are dealing with. The 4N15 is not your grandfather’s 4D56. It is a high-tech, common-rail direct injection engine using a variable geometry turbocharger. Delivers approximately 181 hp (133 kW) at 3,500

The 4N15 has MIVEC (Mitsubishi’s variable valve timing) on the exhaust side. This is rare for a diesel. | | Fuel filter | 30,000 km | Drain water every 5,000 km

When you change the fuel filter (every 20,000 km / 12,000 miles), you must . The 4N15 uses a high-pressure fuel pump that is lubricated by the diesel fuel itself .

The 4N15 engine is a 2.4-liter diesel engine produced by Mitsubishi. It features a common rail fuel injection system, a turbocharger, and an intercooler. The engine produces around 154 horsepower and 258 lb-ft of torque.

Equipped with a timing chain designed for the life of the vehicle, unlike older rubber belts. Essential Maintenance Schedule