: Rename the firmware file to digicap.dav (the standard name for Hikvision/EZVIZ firmware updates) and place it in the root directory of the SD card. Flash the Device : Power off the camera. Insert the SD card. Power the camera back on.
Save and restart the application. You should now see an button under your camera. Perform the Downgrade : Go to Advanced Settings -> System -> System Maintenance . ezviz downgrade firmware free
If the camera is stuck in a boot loop and cannot be reached by EZVIZ Studio, you may need to use a TFTP (Trivial File Transfer Protocol) server. This tool "forces" the firmware onto the camera during the initial seconds of its boot-up sequence. You place the firmware file in the TFTP root folder, set your PC's IP address to a specific static range (usually 192.0.0.128), and power on the camera. The camera will automatically look for the server and pull the firmware. Final Considerations : Rename the firmware file to digicap
Downgrading your EZVIZ device's firmware can be a bit tricky, and it's essential to be aware of the potential risks. Before proceeding, ensure you have a good understanding of the process and the potential limitations. If you're not comfortable with the process, it's recommended to stick with the latest firmware version or contact EZVIZ support for assistance. Power the camera back on
You're looking for a guide on downgrading the firmware of your EZVIZ device to a previous version, and you're interested in free solutions. I'll provide you with a helpful guide, but please note that downgrading firmware can have potential risks and limitations.
in the mobile app settings, or the camera will automatically reinstall the latest version overnight. Alternative Troubleshooting
© Morgan Stage 2026. All Rights Reserved.