Delphi-autocom Cdp- 2017.r3 On Win10 - Mhh Auto - Page 1 Better Site
If you encounter issues while using Delphi-Autocom CDP- 2017.R3 on Windows 10, refer to the troubleshooting guide:
| Problem | Solution | |---------|----------| | “No interface found” | Go to Device Manager → check if appears under Ports (COM & LPT) . If not, reinstall drivers with signature enforcement OFF. | | Error 0x8000FFFF | Run software as Administrator + set compatibility mode to Windows 7 . | | Interface freezes after 5 min | Disable Windows USB selective suspend: Power Options > Change plan settings > Change advanced power settings > USB settings > Disable . | | Windows 10 update breaks it | Use wushowhide.diagcab to block driver updates for “CDP+”. | Delphi-Autocom CDP- 2017.R3 on Win10 - MHH AUTO - Page 1
While the software was released in an era dominated by Windows 7 and Windows 8.1, Windows 10 presents unique challenges. The primary issues discussed on threads often revolve around: If you encounter issues while using Delphi-Autocom CDP- 2017
Found this looking for Neo2 system info, thanks for providing this!
Have been using Alphasmart 3000, Neo and Neo2 for decades w/o issue, so never bothered to collect tools or modify software or hardware. Changed my mind now that I encountered a
Bus Error Accessing: 0xE9BFEC11
Next Instruction At: 0x417F4E
following OS version prompt, but blocking any attempt to try to save or print text. Most of my search is future proofing atm., in case I’ll have more issues in the future and to find a daily backup solution. If you know of other tools or info not listed here, I’d much appreciate an update!
If the above error message gives any indication whether the problem is not just local (some part of SRAM corrupted, or not accessible) but global (SRAM contents are certain to be all gone) I can go ahead and change the CR2032 and reset the unit to get the OS restored. Otherwise, I have not yet given up on finding some USB protocol docs to see whether maybe a PC could access SRAM contents over USB.
Does AlphaSmart Manager still recognize your device? If so, it should be able to backup the text file contents to your computer. If not, the only method I can think of is to remove the CR2032, wait for a day or so, before replacing it to see if the error can be fixed.
Is there a compiled .OS3KAPP version of NeoFontTerminal?
Hi sam,
Yes, you can find the compiled applets in the Releases section of the github repository hosting the source code:
https://github.com/isotherm/betawise/releases