The –auto flag starts programming immediately.
Infineon is a free software utility designed for on-chip flash programming of Infineon microcontrollers. It is commonly used by developers for production line programming and rapid prototyping. Key Capabilities infineon memtool 4.9
| Error | Likely Cause | Solution | |-------|--------------|----------| | BSL sync failed | Wrong baud rate or BSL pin not held low during reset | Re-check wiring; slow baud rate to 9600 initially | | Flash verification error at address 0x4000 | Power supply noise or clock instability | Add decoupling caps, lower programming speed | | Device not responding | Wrong COM port or target not powered | Use loopback test on UART adapter | The –auto flag starts programming immediately
MEMTool 4.9 is Infineon’s Windows application for programming and managing serial EEPROM/FRAM devices and some Infineon microcontrollers via supported adapters (e.g., XMC-SW, AURIX tools, or third-party programmers). Version 4.9 focuses on stability, expanded device support, updated GUI elements, and enhanced script/automation features. Key Capabilities | Error | Likely Cause |