Rok Power Washer Instructions

For gas models, check the oil and fuel levels. Use fresh unleaded fuel and the correct oil type (e.g., SAE 30 for summer).

With the unit OFF , squeeze the gun trigger for 30–60 seconds until a steady stream of water flows out. This removes air pockets that can cause "surging" or pump damage. rok power washer instructions

Screw the lance or wand onto the trigger gun. For gas models, check the oil and fuel levels

| Problem | Possible Cause | Solution | | :--- | :--- | :--- | | | No power supply / Faulty plug. | Check the fuse and plug. Ensure the outlet is working. | | No pressure / Pulsating pressure | Air in pump or clogged nozzle. | Turn off machine, squeeze trigger to bleed air. Check nozzle for blockages. Check water supply is fully turned on. | | Motor hums but does not run | Capacitor failure or seized pump. | Contact customer service. Do not continue running. | | Water leaking from unit | Loose connections or damaged seals. | Check O-rings (rubber washers) inside hose connections. Replace if worn. | This removes air pockets that can cause "surging"

Plug into a GFCI-protected outlet and flip the power switch to "ON". For Gas Models: Set the choke to "Closed" or "On". Flip the ignition switch to "ON".

The Rok Power Washer is a powerful and versatile cleaning tool that's perfect for tackling tough cleaning jobs. By following these Rok Power Washer instructions, you'll be able to safely and effectively use your power washer to clean a variety of surfaces. Remember to always follow safety precautions, assemble and prepare the power washer correctly, and perform regular maintenance to ensure optimal performance. Happy cleaning!